Usage Example for WiFiBee AP Mode

WiFi Bee can work under STA and AP mode. When it works under AP mode, the device can connect to WiFi Bee directly. But please note, AP mode only support one device simultaneously. And the IP address under AP mode has been fixed to 192.168.81.1

• AP Command under AT Mode

1. Mode Switch: STA->AP

   AT Command	Description
   AT+ROLE=ROLE_AP	Return OK
   AT+REBOOT	Reboot WiFiBee and enter AP Mode

2. Mode Switch: AP->STA:

   AT Command	Description
   AT+ROLE=ROLE_STA	Return OK
   AT+REBOOT	Reboot WiFiBee and enter STA Mode

3. Set and Query SSID and Password under AP Mode

   AT Command	Description
   AT+SOFTAPCONF=?	Return WiFiBee SSID and Password
   AT+SOFTAPCONF=jansion1,a12345678	Set AP SSID and Password “jansion1” “a12345678”.

• AP mode also support APP control and Wireless Programming, just work as STA mode.