Product Introduction

The HUSKYLENS 2 Microscope Lens Module is a dedicated optical accessory engineered to unlock the microscopic potential of the HUSKYLENS 2 AI vision sensor. By integrating a specialized 6mm focal length lens, this 30x magnification attachment transforms the HUSKYLENS 2 into a smart digital microscope. It delivers high-resolution 2MP (GC2093) imaging and achieves a minimum resolvable line width of approximately 3 μm, enabling not just the observation but the identification of microscopic targets. This AI-compatible lens opens up new applications in automated biology, microscopic quality inspection, and interdisciplinary technology education.

Technical Specifications

Image Sensor: GC2093, 2 Million Pixels

Focal Length: 6mm

Field of View (FOV): 6°

Magnification: Approx. 30x (A 1mm gap on a caliper is displayed as 30mm on the screen)

System Spatial Resolution: Approx. 161 lp/mm

Minimum Resolvable Line Width: Approx. 3 μm (Based on the USAF 1951 resolution test chart, the line boundaries of Group 7, Element 3 are clearly distinguishable by the naked eye)

Installation Instructions

While the HUSKYLENS 2 is powered off, unscrew the two screws on both sides of the camera and remove the original camera module.

Align the white connector and insert the microscope module.

Secure it with screws.
Note: Failing to tighten the screws may cause poor contact, which could damage the camera module.