Connect the seeMote Cube to Apple Vision Pro

Power on the seeMote Cube

1. Press and hold the power button on the seeMote Cube.
2. Release the button when the status indicator starts flashing.
3. The device will enter Bluetooth pairing mode and wait for Apple Vision Pro to connect.

Note: If the device does not power on, charge it for at least 10 minutes and try again.

Connect to Apple Vision Pro

1. On Apple Vision Pro, open Settings.
2. Select Bluetooth.
3. Make sure Bluetooth is turned on.
4. Find the device named seeMote Cube under the list of available devices.
5. Select seeMote Cube to start pairing.
6. Wait until the device status changes to Connected.

Pair the Cube Again

If the connection cannot be restored:

1. Open Settings → Bluetooth on Apple Vision Pro.
2. Find seeMote Cube.
3. Select the device information button.
4. Select Forget This Device.
5. Power off the seeMote Cube.
6. Power the Cube on again and return it to pairing mode.
7. Select seeMote Cube from the list of available Bluetooth devices.

Troubleshooting

The Cube Does Not Appear in the Bluetooth List

• Confirm that the Cube is powered on.
• Confirm that the Cube is in pairing mode.
• Move the Cube closer to Apple Vision Pro.
• Make sure the Cube is not connected to another device.
• Turn Bluetooth off and on again on Apple Vision Pro.
• Restart the Cube and check the device list again.

The Cube Cannot Connect

• Confirm that the Cube has sufficient battery power.
• Remove the Cube from the Bluetooth device list and pair it again.
• Restart Apple Vision Pro.
• Confirm that the installed visionOS version is supported.
• Make sure only one Apple Vision Pro is attempting to connect to the Cube.

The Connection Is Unstable

• Keep the Cube within the recommended Bluetooth range.
• Avoid placing large metal objects between the Cube and Apple Vision Pro.
• Confirm that the Cube battery is not low.
• Restart the Cube and reconnect it.
• Update the Cube firmware if a newer compatible version is available.