Using the seeMoteViewer App

After preparing the development environment and connecting the seeMote Cube, install and launch seeMoteViewer on Apple Vision Pro.

Install and Launch seeMoteViewer

1. Open seeMoteViewer.xcodeproj in Xcode.

2. In the Xcode toolbar, open the run destination menu.

3. Select the connected Apple Vision Pro.

4. Click Run to build, install, and launch seeMoteViewer.

5. When launching the app for the first time, follow the instructions on Apple Vision Pro to grant the required permissions.

Start the Immersive Experience

1. Launch seeMoteViewer.

2. Turn on Start Experience.

3. Enter the immersive space.

A virtual model will appear aligned with the physical seeMote Cube. Move and rotate the Cube to observe its spatial tracking performance in real time.

Select a Virtual Model

Open Select Model to switch between the available virtual models.

Accessory Model - Displays the default virtual Cube model.

Toy Drummer - Displays the auto animation Toy Drummer model.

This feature demonstrates how the Cube's tracked position and orientation can drive different virtual objects.

Place a Digital Replica

You can place a virtual model in the surrounding space in either of the following ways:

Press any physical button on the seeMote Cube or select Clone in the app.

Each action places a virtual model at the corresponding position in the immersive space.

Test Exploded View

Mars Rover - Displays the model with an interactive exploded view.

Test Haptic Feedback

Select Play Haptic Feedback to activate the Cube's built-in vibration motor.

Clear the Scene

Select Clear Scene to remove all virtual models currently placed in the immersive space.

Troubleshooting

Apple Vision Pro Does Not Appear in Xcode

• Confirm that Developer Mode is enabled.

• Confirm that the Mac and Apple Vision Pro use the same Apple ID and network.

• Complete device pairing again.

The Virtual Model Does Not Follow the Cube

• Confirm that the Cube is connected over Bluetooth.

• Confirm that Start Experience is enabled.

• Leave and re-enter the immersive space.

• Restart the Cube and relaunch the app if necessary.