Connect the seeMote Cap to Apple Vision Pro

Power On the seeMote Cap

1. Press and hold the power button on the seeMote Cap.
2. Release the button when the status indicator starts flashing.
3. The device will enter Bluetooth pairing mode and wait for Apple Vision Pro to connect.

Note: If the device does not power on, charge it for at least 10 minutes and try again.

Connect to Apple Vision Pro

1. On Apple Vision Pro, open Settings.
2. Select Bluetooth.
3. Make sure Bluetooth is turned on.
4. Find the device named seeMote Cap under the list of available devices.
5. Select seeMote Cap to start pairing.
6. Wait until the device status changes to Connected.

Pair the Cap Again

If the connection cannot be restored:

1. Open Settings → Bluetooth on Apple Vision Pro.
2. Find seeMote Cap.
3. Select the device information button.
4. Select Forget This Device.
5. Power off the seeMote Cap.
6. Power the Cap on again and return it to pairing mode.
7. Select seeMote Cap from the list of available Bluetooth devices.

Troubleshooting

The Cap Does Not Appear in the Bluetooth List

• Confirm that the Cap is powered on.
• Confirm that the Cap is in pairing mode.
• Move the Cap closer to Apple Vision Pro.
• Make sure the Cap is not connected to another device.
• Turn Bluetooth off and on again on Apple Vision Pro.
• Restart the Cap and check the device list again.

The Cap Cannot Connect

• Confirm that the Cap has sufficient battery power.
• Remove the Cap from the Bluetooth device list and pair it again.
• Restart Apple Vision Pro.
• Confirm that the installed visionOS version is supported.
• Make sure only one Apple Vision Pro is attempting to connect to the Cap.

The Connection Is Unstable

• Keep the Cap within the recommended Bluetooth range.
• Avoid placing large metal objects between the Cap and Apple Vision Pro.
• Confirm that the Cap battery is not low.
• Restart the Cap and reconnect it.
• Update the Cap firmware if a newer compatible version is available.