Getting Started

Makecode Online Graphical Programming

Makecode basic operation tutorial: https://wiki.dfrobot.com/Makecode%20Get-started%20Tutorial

Micro:IoT library address: [https://github.com/DFRobot/pxt-microIoT. How to install an library?

Easy IoT Platform

• Easy IoT from DFRobot is dedicated to simple solutions for Internet of Things.
• Features Included:
  • Get started in 10 minutes, plug and operate
  • OBLOQ supported, serial port transmission
  • Real time monitoring, data analysis

Sign in and Setting Easy IoT

• Open the easy IoT website：http://iot.dfrobot.com.cn/

• With a micro:bit board, a micro:bit IoT expansion board and Easy IoT, a whole IoT system will be ready.

• Sign up and Sign In

  • Click the Sign up/Sign in at the upper right corner of the webpage to register a account.
  • Fill in the black with your personal information, you can register via phone or email.
  • Sign in the Easy IoT, then it will enter into Workshop interface. You need to add a new device to match your micro:bit.

• Easy IoT Setting
  • When added a new device, a device topic Topic: elJA7JHZg will be generated randomly, and you can click the device name to change it.
  • Click "send message", then the webpage of message receiving and transmitting will appear. You can find the details of the received data.
  • Get to know other information in this page- ID account interface

• Do not use 3V CR123A battery and non-rechargeable battery. Recharging the non-rechargeable battery is dangerous.
• When the indicator turns purple, it means that MQTT is disconnected, and please check if the id account is correct.