Example Code for UNIHIKER-MindPlus-Graphical Programming-Weather Data
This article provides a detailed guide on setting up and programming UNIHIKER with Mind+ to display real-time weather data using the Lark Weather Station, including hardware and software preparations, wiring instructions, and a sample code demonstration.
Hardware Preparation
- UNIHIKER x1
- Lark Weather Station x1
Software Preparation
- Mind+ software (with Lark Weather Station User Library)
- Enable "Official Library - Unihiker" and "pinpong library - pinpong initialization" in extensions.
Wiring Diagram
Other Preparation Work
For Mind+
- Load the Lark Weather Station user library.
- Switch to Python mode and enable required extensions.
- Use the "Lark Initialization" block to synchronize UNIHIKER’s system time with the Lark Weather Station.
Sample Code
The UNIHIKER will display real-time weather data on its screen. A sample Mind+ setup is shown below:
Additional Information
- Ensure the Pinpong library is updated to version 0.4.9 or above to avoid compatibility issues.
- The "Lark Initialization" block in Mind+ automatically synchronizes the UNIHIKER’s time with the Lark Weather Station.
Was this article helpful?