Getting Started

Before You Start

• 5V Mobile Power Supply/5V Adapter *1
• Computer *1

STEP1: Assemble

1. Align the wind vane with the slot on the wind direction shaft and gently press to complete the installation. To remove, gently press to pop it out, and do not pull forcefully.
2. Connect the tripod to the 1/4-inch thread hole at the bottom of the weather station.

STEP2: Data Collection

1. Connect a 5V mobile power source or 5V adapter to the Type-C interface of the weather station to power it.
2. Please calibrate the orientation of the weather station each time it is started to ensure accuracy. Adjust the angle of the weather station so that the Type-C interface faces the direction pointed by the compass S, i.e., align the Type-C port towards the south. Once the weather station starts up normally, the yellow light will turn off. At this time, you need to rotate the wind vane once to complete the wind direction calibration.
3. After calibration, wait for 10 seconds. The weather station will automatically start data collection and record, defaulting to collect and store data every 30 seconds. The Venetian blind will flash green when record data.

Note: At this time, do not power the weather station directly from a computer. If you connect the computer to the weather station, the weather station will only provide data export functionality and will not be able to store data.

STEP3: Data Export

1. After data collection is complete, first disconnect the weather station from the 5V power source. Connect the computer to the Type-C interface of the weather station, and a USB drive will pop up on the computer.
   

2. Open the USB drive, locate the latest CSV file, and open it to view the recorded data.