SKU: DRI0002
The L298N Dual Motor Controller Module is a high-performance 4.8-46V, 2A controller designed to directly drive two bi-directional DC motors with improved heat dissipation and easy control using the L298N chip, featuring high-speed short diode protection and reduced wire resistance.
Downloadable Resources
1. Example Code for DFRduino-Dual DC Motor Control
This tutorial shows you how to use l298N motor drive shield to drive two DC motors.
Reference
For the screws of the terminal block, in different batches, the screws may be slotted screws or Phillips screws.
| Parameter | Value |
|---|---|
| Logic part input voltage | 6 ~ 12V |
| Driven part input voltage Vs | 4.8 ~ 46V |
| Logic part work current Iss | 36mA |
| Drive part operating current Io | 2A |
| Maximum power dissipation | 25W (T = 75 degree Celsius) |
| Control signal input level | High: 2.3V = Vin = Vss; Low: -0.3V = Vin = 1.5V |
| Operating temperature | -25 degree Celsius ~ +130 degree Celsius |
| Drive Type | Dual high-power H-bridge driver |
| Module Size | 47 mm × 53mm |
| Module Weight | About 29g |
| E | M | RUN |
|---|---|---|
| LOW | LOW/HIGH | STOP |
| HIGH | HIGH | Back Direction |
| HIGH | LOW | Forward direction |
| PWM | LOW/HIGH | Speed |
Was this article helpful?
