SKU: DFR1225
The Maqueen Plus V3 AA is revolutionizing STEM education and competitions in primary and secondary schools by providing an advanced educational robot that enhances creativity, enables fair competition, and offers a comprehensive learning experience, addressing the limitations of traditional methods.
| Name | Maqueen Plus V2 | Maqueen Plus V3 |
|---|---|---|
| WS2812 RGB ¡Á4 | ? | ? |
| Infrared receiving sensor¡Á1 | ? | ? |
| Bottom acrylic protection | ? | ? |
| Buzzer¡Á1 | ? | ? |
| Line-tracking sensor calibration function | ? | ? |
| Ultrasonic distance sensor | ? | Upgrade to matrix lidar |
| LED Car headlights ¡Á2 | ? | Upgrade to RGB lights |
| RGB Car headlights ¡Á2 | ¡Á | ? |
| Matrix laser sensor | ¡Á | ? |
| Light sensor ¡Á2 | ¡Á | ? |
| Motor encoder and PID control | ¡Á | ? |
| Chip-level built-in line-tracking function | ¡Á | ? |
| Chip-level built-in intersection recognition function | ¡Á | ? |
| The motor is detachable | ¡Á | ? |
| Special voltage stabilizing circuit for the motor | ¡Á | ? |
| The firmware is upgradable | ¡Á | ? |
| Adjustable-angle metal bracket | ¡Á | ? |
| Whether it supports the unihiker Board K10 | ¡Á | ? |
| Does the user need to assemble | ¡Á | ? |
| Parameter | Specification |
|---|---|
| AA Battery Version | 3.5V ¨C 6V (4 ¡Á AA: 1.5V alkaline or 1.2V Ni-MH) |
| 18650 Battery Version | 3.5V ¨C 4.2V (1 ¡Á rechargeable 18650 Li-ion) |
| Charging Port | TYPE-C / MicroUSB |
| Charging Voltage | 5V 1A |
| Battery Reverse Connection Protection | Supported |
| Battery Level Display | 5-segment digital tube |
| Charging Indicator | Digital tube: red during charging, green when fully charged; supports charging while powered off |
| Parameter | Specification |
|---|---|
| Number of Sensors | 5 |
| Calibration Button | 1 |
| Output Type | Switching quantity / Analog quantity |
| Intersection Recognition | Crossroad, T-shaped, Right+Straight, Left+Straight (4 types) |
| Built-in Line-Tracking Function | Supported |
| Built-in Line-Tracking Speed Levels | 5 gears (Level 1 ¨C 5) |
| Parameter | Specification |
|---|---|
| WS2812 RGB LEDs | 4 |
| WS2812 Color Range | R255 ¡Á G255 ¡Á B255 (16.7 million colors) |
| RGB Car Lights | 2 |
| Car Light Colors | Red, Green, Yellow, Blue, Purple, Cyan, White |
| Parameter | Specification |
|---|---|
| Number of Sensors | 2 |
| Data Range | 0 ¨C 1023 |
| Parameter | Specification |
|---|---|
| Number of Sensors | 1 |
| Supply Voltage | 3.3V ¨C 5V |
| Data Interfaces | I2C / UART / USB |
| Physical Interfaces | PH2.0-4P (Gravity) / TYPE-C |
| Matrix Size | 8¡Á8 (64 measurement points) |
| Function Modes | Matrix measurement mode / Intelligent obstacle avoidance mode |
| I2C Address | 0x30 / 0x31 / 0x32 / 0x33 (4 selectable) |
| Firmware Update | Via USB |
| Ranging Mode | Continuous |
| Ranging Speed | 15 Hz |
| Ranging Range | 20 mm ¨C 4000 mm |
| Ranging Accuracy | ? 20¨C200 mm: ¡À11 mm (white), ¡À12 mm (light gray/gray) ? 200¨C4000 mm: ¡À5% (white), ¡À6% (light gray/gray) |
| Field of View | Horizontal 60¡ã, Vertical 60¡ã, Diagonal 90¡ã |
| Laser Safety | Class 1 (eye-safe) |
| Parameter | Specification |
|---|---|
| Number of Motors | 2 |
| Motor Model | N20 metal gear motor |
| Motor Interface | PH2.0-2P |
| Motor Power Supply | Independent 5V regulated supply |
| Disassembly Method | Screw-fixed (M3 screws) |
| Parameter | Specification |
|---|---|
| Encoders | 2 |
| Sensing Method | Magnetic induction |
| Encoder Resolution | 4-line |
| PID Control Capabilities | Distance control (¡À2 cm), Angle control (¡À5¡ã) |
| Speed Measurement Unit | Centimeters per minute (cm/min) |
| Component | Quantity |
|---|---|
| Infrared Receiver Sensor | 1 |
| Buzzer | 1 |
| Parameter | Specification |
|---|---|
| Metal Bracket Parts | 2 |
| Adjustment Axis | 1-axis |
| Adjustment Angle Range | 270¡ã |
| Bracket Fastening | 4 ¡Á M3 hand-twisted metal screws |
| PCB Threaded Mounting Holes | 2 |
| Firmware Upgrade | 1 button + interface |
| Extended GPIOs | 14 |
| Bottom Protection | 1 ¡Á acrylic plate |
Was this article helpful?