Introduction
The bright light LED is the most simple white LED module. Users can turn on the LED and adjust its brightness. Combine this LED with other output modules to realize various functions.
LED module will be on/off according to the different input signal, as shown below:
Input "ON" or "1", LED lights up;
Input "OFF" or "2", LED goes out.
The module can be used with micro:bit and Arduino for various programming and non-programming appllications.
Specification
- Power Supply: 3.0V-5.5V
- Current Consumption: (Max)5mA@5V
- Interface Type: PH2.0
- White LED × 1
- Dimension: 26×22mm/1.02×0.87"
Pinout
| Label | Name | Description |
|---|---|---|
| 1 | VCC | Power Input |
| 2 | GND | Power Ground |
| 3 | INPUT | Digital Signal Input |
Usage Description
Turn on/off the LED module by controlling the level of the digital signal.
Bright light LED module emits bright white light. The usage is the same as other normal LEDs. You can refer to the Red/Green/Blue LED module.
Principle
Input high level, and LED module lights up; Input low, and it goes out. For more details, refer to the Red/Green/Blue LED module.
Application
(1) Make a Lamp
Description: make a lamp, and control the LED via a button.
FAQ
For any questions, advice or cool ideas to share, please visit the DFRobot Forum
Turn to the Boson Kit Page