Fermion: 1.8" 128x160 IPS TFT LCD Display Module

Q: <p>I am facing problem in memory card slot whnen ever i try to run the pogram its always saying initialization failed and i try a new one memory card I am facing the same problme but when i try to your 320*240 display its working fine with the same memory card. Cna you suggest me any possible reesoans i can also share my code with you.</p>

<p>Sorry we don't have micropython code, we only provide arduino IDE code, which can also be uploaded on pico.</p>

1. Example Code for Arduino-Basic Display Functions

This article provides step-by-step guidance on using basic display functions in Arduino projects, featuring sample code, wiring diagrams, and preparation instructions for hardware and software. Ideal for users looking to enhance their projects with effective visual outputs using FireBeetle ESP32-E and TFT LCD.

2. Example Code for Arduino-Chinese Font Display

This article guides readers through the process of displaying Chinese fonts on an Arduino setup, detailing hardware and software preparations, wiring configurations, and providing example code for execution.

3. Example Code for Arduino-Bitmap Display

This article offers a detailed tutorial on setting up and coding an Arduino bitmap display, covering hardware preparation, software installation, wiring diagrams, and providing sample code for effective implementation.

4. Example Code for Arduino-Rainbow Gradient Display

The Rainbow.ino code shows us the color display effect of this display, with a gradient color from red to blue displayed on the screen.

5. Example Code for Arduino-Icon Display

The icon.ino code shows us some common icons.

6. Example Code for Arduino-English Font Display

This article is a comprehensive guide to displaying English fonts on Arduino using the DFRobot GDL Library. It includes step-by-step instructions for hardware and software preparation, wiring diagrams, and sample code, targeting ESP32 and ESP8266 platforms.

7. Example Code for Arduino-SD Card Picture Display

This article offers a comprehensive guide on displaying pictures using an SD card with Arduino, focusing on hardware setup, software requirements, and example code for ESP32 and similar boards.

8. Example Code for Arduino-UI Coordinate (Broken Line Graph)

This article presents a detailed guide on creating a broken line graph using Arduino C with an ESP32 and a TFT LCD display, covering hardware and software preparation, wiring configuration, and sample code implementation for seamless integration.

Reference

This article serves as a reference for Arduino IDE libraries and DFRobot GDL API, offering insights into library installation, access to schematics and datasheets, and downloadable 3D and 2D files to aid in comprehensive project development.

Parameter	Specification
Working voltage	3.3V~5V
TFT viewing angle	120 degrees
Number of pixels	128 columns × 160 rows
Interface mode	SPI, GDI
Driver chip	ST7735S
Total power consumption	0.11W
Working temperature	-10℃~+60℃
Display area	26mm×35mm / 1.02×1.38 inch
Module size	34mm×55mm / 1.34×2.17 inch
Mounting hole pitch	29mm / 1.14 inch, 50mm / 1.97 inch
Mounting hole size	2mm / 0.08 inch

Num	Label	Description
1	VCC	Power
2	GND	Ground
3	SCLK	Clock signal
4	MOSI	Receiving data
5	MISO	Transmitting data
6	CS	Screen Chip-select
7	RES	Reset
8	DC	Data/Command
9	BLK	Backlight
10	SDCS	SD card chip-select

Fermion: 1.8" 128x160 IPS TFT LCD Display Module

Specification

Pinout