Function Introduction-Face Recognition

This function can detect any face contour, recognize and track the learned face.

Recognize one face

The default setting is to learn and recognize a single face.

Operation and Setting

Dial the function button to the left until the word "Face recognition" is displayed at the top of the screen.

Learning and Detection

1. Face Detection:

   Point the HuskyLens at any faces. When a face is detected, it will be automatically selected by a white frame with words "Face" on the screen.
   

   If you want HuskyLens to learn or recognize your face, that is, take a selfie, you can't see the screen at this time, you can determine the status according to the different colors of the RGB indicator.

2. Face Learning:

   Point the “+” symbol at a face, short press the "learning button" to learn the face. If the same face is detected by HuskyLens, a blue frame with words "Face: ID1" will be displayed on the screen，which indicates that HuskyLens has learned the face and can recognize it now.

   

   However, HuskyLens only learned one plane (one-dimensional) of the face after the above operation, while human face is three-dimensional. If the angle of the face has been changed, HuskyLens may not recognize it. So you need to let HuskyLens learn a face from its different angles.

   The operation shows as follows：(Before HuskyLens learning news thing, please let it forget the former things first.)

   Keep pressing the “learning button”, point HuskyLens' "+" symbol at different angles of the face. During this process, a yellow frame with words "Face: ID1" will be displayed on the screen, which indicates HuskyLens is learning the face. Please point the yellow frame at different angles of the same person's face, such as front face and side face (or multiple photos of the same person), to enter all angles of this person's face.

   Then you can release the "learning button" to finish the learning. When Huskylens detected the learned face, a blue frame with words "Face: ID1" will be displayed, now HuskyLens can recognize the face from different angles.

   

   If there is no “+” symbol in the center of the screen, it means that the HuskyLens has already learned the face in the current function, now HuskyLens is detecting it. If you want to let HuskyLens learn a new face, you have to make it forget the learned face first.

3. Face Recognition:

   The learned face information will be automatically saved. When HuskyLens detects the learned face, this face will be selected by a blue frame and identified as face: ID1. The size of the frame will change with the size of the face, and the face will be tracked automatically.

   

4. Forget the Learned Face:

   If there is no “+” symbol in the center of the screen, it means that the HuskyLens has already learned the face in the current function. If you want to recognize another face, or re-enter face information, you need to delete the current face information.

   When HuskyLens is in the face recognition mode, short press the "learning button", the screen will display "click again to forget". Before the countdown ends, short press the "learning button" again to delete the learned face information, then the yellow "+" symbol is displayed. Now you can let HuskyLens learn a new face.

   The operation of forgetting is totally the same in other functions. Therefore, this operation will not be repeated in subsequent chapters.

   

Recognize multiple faces

The default setting is to learn a single face. In order to learn multiple faces, we need to enable "Learn Multiple" of face recognition.

Operation and Setting

1. Dial the function button to the left until the word "Face recognition" is displayed at the top of the screen.

2. Long press the function button to enter the parameter setting of the face recognition function.

3. Dial the function button until "Learn Multiple" is displayed, then short press the function button, and dial to the right to turn on the "Learn Multiple" switch, that is, progress bar turns blue and the square icon on the progress bar moves to the right. Then short press the function button to confirm this parameter.

4. Dial the function button to the left until "Save & Return" shows. And the screen prompts "Do you want to save the parameters?" Select "Yes" in default, now short-press the function button to save the parameters and return automatically.
   

Learning and Detection

1. Multiple Faces Learning:

   Point the “+” symbol at the face, long press the "learning button" to learn the face of the first person. Then release the "learning button", a blue frame with words "Face: ID1" will be displayed if HuskyLens detects the same face，meanwhile, a message "Click again to continue! Click other button to finish" will be displayed. Please short press the "learning button" before the countdown ends if you want to learn the face of other person. If not, short press the "function button" before the countdown ends, or do not press any button to let the countdown ends.

   In this chapter, we will learn the next face continuously. So we need to short press the "learning button" before the countdown ends. Then we can let HuskyLens learn the face of the second person. The same as the steps to recognize the first face, point the “+” symbol at the second face, long press the "learning button" to learn the face of the second person. Then release the "learning button", a blue frame with words "Face: ID2" will be displayed if HuskyLens detects the same face.
   

   The face ID is the same as the order of entering the face, that is: the learned faces will be marked as "face: ID1", "face: ID2", "face: ID3" in order, and different face IDs correspond to different color frames.

   If there is no “+” symbol in the center of the screen before learning, it means that the HuskyLens has already learned, now HuskyLens is detecting face. If you want to let HuskLens learn new face, you need to let HuskyLens forget the learned face first.

2. Multiple Faces Recognition:

   The learned face information will be saved automatically. When HuskyLens detects the learned face from multiple faces, the learned face will be selected with a frame and identified by the message face: IDx. For example, when HuskyLens detects the learned face of the first person, it will be selected with a blue frame and identify face: ID1; when HuskyLens detects the learned face of the second person, it will be selected with a yellow frame and identify face: ID2; and so on.

   The color of the frame corresponding to different face IDs is also different, and the frame size will change with the size of the face, and the face will be automatically tracked.