HUSKYLENS 2 Power Board Wiring Guide

HUSKYLENS 2 Power Board

HUSKYLENS 2 has specific requirements for the power supply voltage during operation. If you need to use it with common controllers (such as Arduino, UNIHIKER K10、UNIHIKER M10, etc). For project, it is recommended to power it via the HUSKYLENS 2 Power Board to ensure stable performance.

If you are already familiar with all the functions of HUSKYLENS 2 and want to create projects by programming with controllers, we recommend the following wiring methods.

• Use a 4Pin twisted white cable to connect HUSKYLENS 2 to the interface marked "I2C/UART" on the Huskylens 2 Power Board.

• Connect one end of a Type-C cable to the "PWR IN" interface of the Huskylens 2 Power Board, and the other end to a power supply device (such as a computer USB port).

• Use a 4Pin I2C/UART Sensor Cable to connect to the interface marked "Gravity" on Huskylens 2 Power Board, and the other end to the target controller.

• Connect the controller to the computer with the controller-compatible data cable. After completing the hardware connection, you can start programming and project creation.

We provide project examples of HUSKYLENS 2 used with main controllers, as shown below: Compatible Controllers and Project Examples

You can refer to the following wiring diagram

Wiring Diagram for Arduino with HUSKYLENS 2

Wiring Diagram for UNIHIKER K10 with HUSKYLENS 2