Raspberry PI Camera Module 5 megapixels (SEN0173)

The Raspberry Pi camera module is a custom designed accessory for Raspberry Pi.It connects to the Raspberry Pi through one of two small slots on the front of the Raspberry Pi.The slot USES a CSI interface designed specifically for the camera module.The CSI bus enables ultra-high data transfer rates and separate transmission of pixel data. The camera module sensor has a physical resolution of 5 megapixels and carries a fixed focal length lens on board.For still images, the camera module provides a still image of 2592 x 1944 pixels, and supports 30 seconds of 1080P/frame, 60 seconds of 720P/frame, and 60/90 frames of 640x480P/second.

Product WIKI

USB Camera (FIT0701)

This is a driving-free camera that works when plugged into a USB port. It has a 30W pixel, 640 by 480 resolution, plug and play, and is compatible with both the Raspberry PI and Nvidia Jetson Nano motherboards, especially if your Raspberry PI or Jetson Nano motherboard has a case attached. With a compact size of 30mm25mm21.4mm, the module can be embedded in various devices for face recognition, image recognition, security, remote teaching and other projects.

Raspberry PI Camera Module V2 (SEN0323)

This product is the second edition of the camera module of Raspberry Pi, applicable to all models of Raspberry Pi 1,2,3 and 4.It has a high quality, 8 megapixel Sony IMX219 image sensor, a fixed focal length lens, and can be used for high-definition video and still photos, such as 3280 2464 pixel still images, as well as 1080@30fPS,720@60fps and VG@90Fps video.You can read about it on the SONY website, and it's no exaggeration to say that it's not just a resolution upgrade, but a leap forward in image quality, color fidelity, and low lighting.