Overview

Breadboard-Plugin series is a new kit for breadboard experiment. It provides convenient, reliable and reusable components, plugins and modules. This innovative approach will solve the following issues when using a breadboard:

  • The problem by using DIP type of components
    • Hard to read the value (Resistor color codes)
    • Severe deformations of the pin after used, non-reusable, not environment-friendly
    • The pin diameter is too thin or too thick, poor match with the breadboard hole
    • Confused the order of transistor “e”, “b”, “c” pins
  • Usage problem: Most of sensors and actuators require 3 interfaces: Signal/VCC/GND, you have to use the jumper wire for the connection, messy and unreliable.

Features

  • Easy to recognize : Resistance value, capacitance values, positive/negative polaron and pin functions are marked clearly.
  • Easy to learn : The circuit symbol is clearly visible, directly match the circuit diagram
  • Easy to use : Direct-plug pin
  • Easy to Plug/unplug : The 0.64mm diametral pin matches the breadboard hole perfectly
  • High-reliability : ENIG technology, the circuit connection is reliable and durable
  • Environment-friendly : Reusable and Environment-friendly

Breadboard-Plugin is designed by Maker LeoYan, produced and sold by DFRobot

Specification

resistors

resistors
Description
Package: 1206
Resistance: 220R, 1K, 4.7K, 10K
Pins: 2
Lead Pitch: 4x2.54mm (400mil)
Dimensions (without pins): 13.8 (w) x 11.4 (h) mm

Capacitors

Capacitors
Description
Package: 1206
Capacitance: 22pF@50V,100nF(0.1uF)@50V,47uF@10V
Pins: 2
Lead Pitch: 4x2.54mm (400mil)
Dimensions (without pins): 13.8(W) x 11.4(H) mm

Leds

Leds
Description
Package: 1206 (PCB integrates current limiting resistance)
Color: Red (R), Yellow (Y), Green (G), Blue (B)
Pins: 2
Lead Pitch: 4x2.54mm (400mil)
Dimensions (without pins): 13.8(W) x 14.5(H) mm

Diodes

Diodes
Description
Type: SS14 (Schottky Barrier Rectifiers)
Parameter: If=1A, Vfm=0.7V, Vr=40V
Pins: 2
Lead Pitch: 4x2.54mm (400mil)
Dimensions (without pins): 13.8(W) x 11.5(H) mm

Transistor-NPN

Transistor-NPN
Description
Type: BC817-25
Parameter: Vceo=45V, Ic=500mA, hFE=400
Pins: 3
Lead Pitch: 2x2.54mm (200mil)
Dimensions (without pins): 13.8(W) x 11.7(H) mm

Transistor-PNP

Transistor-PNP
Description
Type: BC807-25
Parameter: Vceo=-45V, Ic=-500mA, hFE=400
Pins: 3
Lead Pitch: 2x2.54mm (200mil)
Dimensions (without pins): 13.8(W) x 10.7(H) mm

Breadboard Plugin Connector

Breadboard Plugin Connector
Description
Support 4 x 3-Pin modules
Dimensions: 15.2x16.2mm

Instructions

  1. Breadboard Plugin Connector
  • Circuit Schematic

Schematic

  • Breadboard

The kit supports following kinds of breadboard:

  • Breadboard 1: it is the default supported breadboard, can use it directly.

  • Breadboard 2: If using this kind of bread board, resolder Pin at "M" and solder the Pin to “L” or “R”.

  • Usage tutorial
  1. Recognize the front and back
  2. Plug the back pins into Breadboard
  3. Plug the Module on the breadboard plugin board. (Please notice the power polarities)

FAQ

There is no question about this product yet, if you have any problem or suggestions, you are welcome to email to us or post on our Forum! Thank you!

For any question/ advice/ cool idea to share with us, please visit DFRobot Forum or Email to Techsupport Team <techsupport@dfrobot.com>.

More Documentation