Introduction
Mainboard-3IO can be used to supply power for other modules. Connect the input module to the left, output module to the right, a basic project is ready. Don't forget to connect an external power source to the module.
Application: programmable, micro:bit, Arduino.
Specification
- Power Supply Port: USB
- Power Supply: 3.0-5.5V
- Maximum Output Current: 500mA
- Interface: PH2.0 port ×6
- Dimension: 38×32 mm/1.50×1.26"
Pinout
| Name | Description |
|---|---|
| USB | USB power input |
| VCC | Power output |
| GND | Ground |
| INA | Channel A Signal Input |
| OUTA | Channel A Signal Output |
| INB | Channel B Signal Input |
| OUTB | Channel B Signal Output |
| INC | Channel C Signal Input |
| OUTC | Channel C Signal Output |
Usage Description
Mainboard-3IO can provide power for other modules to let them start working. Connect the input module to the left, output module to the right, a basic project is ready. Don't forget to connect an external power source to the module.
Application
- Make An Lamp
Description: Mainboard-3IO provides power for Push button module and LED module.
FAQ
For any questions, advice or cool ideas to share, please visit the DFRobot Forum
Turn to the Boson Kit Page