CommunityForumWikiBlogLearn
Modules
LCDs/LEDs/E-ink/Displays

BOSON OLED Display Module o11

SKU: BOS0044

The OLED module can be used to provide visual effect for users, which is easy to view experiment results. The module provides preset information display of 8 different modules, so users can switch to the corresponding number to see by the on-board button. It's commonly used in applications such as heart rate monitor, temperature and humidity monitor, PH detection, soil humidity detection and conductivity switch. In our daily life, the OLED module will be used for eletric devices like TV, computers, washing machine, automobiles, and gauges.

BOSON: OLED Display Module o11
  • Docs
  • Tech Specs
  • Certifications
    • 1. Example Code for Boson-Heart Rate Monitor

    This article provides example code and setup instructions for the Boson Heart Rate Monitor, including hardware preparation with the sensor, OLED module, and Mainboard-3IO, along with a wiring diagram for seamless integration.
    2. Example Code for Boson-Light Intensity Plant Growth

    This article guides users through using Boson light sensors to monitor and enhance plant growth, including setup and code execution for optimal light intensity measurement.
    3. Example Code for Boson-Soil Moisture Seed Germination

    Explore how to use the Boson soil moisture sensor to improve seed germination, complete with hardware setup, wiring, and sample code for optimal results.
    4. Example Code for Boson-Object Conductivity Detection

    The article provides an example code and detailed instructions for setting up and executing Boson-Object conductivity detection using various hardware components and a wiring diagram.
    5. Example Code for Boson-Soft Drink pH Investigation

    This article provides a comprehensive guide on using example code for the Boson-Soft Drink pH Investigation, detailing the necessary hardware and wiring, including a pH sensor and OLED module, as well as the specific sensor number setup for accurate pH measurement.
    Reference

    The article delves into how an OLED module collects and displays data from various sensors, enhancing visualization through its protective design and preset display modes for diverse data representation.

    Specification

    Parameter Value
    Operating Voltage 3.3V-5V
    Operating Current 13mA
    Interface Mode PH2.0-3P
    Dimension 37mm×51mm/1.46×2.01"

    Pinout

    Label Name Description
    1 GND Power negative
    2 VCC Power positive
    3 Signal Signal iutput
    4 Display Display input signal information
    5 Button Switch the displayed content
  • PFAS PFAS

    • Was this article helpful?

    TOP