Introduction
The splitter module splits 1-way input signal into 2-way signal.
The working principle is as follow:
When the input signal is "OFF" or "0", the module outputs "OFF" or "0";
when the input signal is "ON" or "1", the module outputs "ON" or "1".Application: when we need one signal to control two device and the interface is not enough, the splitter module can change one signal into two same outputs to control the devices.
Specification
- Power Supply: 3.0-5.5V
- Interface: PH2.0 ×3
- Dimension: 26×22mm/1.02×0.87"
Pinout
| Name | Description |
|---|---|
| VCC | Power Input |
| GND | GND |
| IN | Digital Input |
| OUTA | Digital Output |
| OUTB | Digital Output |
Usage Description
The logic module-AND cannot be directly used as an input or output module. Users have to connect input modules to the input interfaces of the module, output module to output interface. Change the signal of the input interface to control the two outputs.
Truth Table
| Input | Onput A | Output B |
|---|---|---|
| off | off | off |
| on | on | on |
Application
- Control the LEDs via Push Button
Description: splitter can control two LEDs with one push button.
FAQ
For any questions, advice or cool ideas to share, please visit the DFRobot Forum
Turn to the Boson Kit Page