1. Introduction
This is a 5-inch IPS capacitive touchscreen display with a resolution of 800×480. It supports the Raspberry Pi DSI interface, allowing for quick and easy connection to the Raspberry Pi.
In the use of the Raspberry Pi, the touchscreen plays a significant role, serving as a key interface for interaction, information display, and content presentation. The Raspberry Pi's versatility, expandability, and ease of development make it highly potential for various projects. If your project revolves around the Raspberry Pi and requires a medium-sized touchscreen display, this product would be an excellent choice.
This product boasts excellent quality specifications. It utilizes IPS panel technology and optical bonding, with a high brightness of up to 550cd/㎡. It operates within a wide temperature range, from -20℃ to 70℃. These features allow for a wide viewing angle, impressive response speed, clear and bright images, high color reproduction, and durability in harsh temperature conditions.
Additionally, the screen surface is treated to be fingerprint-resistant and anti-glare, ensuring excellent performance even under outdoor sunlight.
2. Features
- 800×480 resolution
- High brightness of 550cd/㎡
- IPS hard screen
- Full lamination process
- Surface treated for anti-fingerprint and anti-glare
- 5-point capacitive touch
- Raspberry Pi DSI plug-and-play
- Compatible with Raspberry Pi 3B/3B+/4B
3. Application Scenarios
- Raspberry Pi IoT projects
- Raspberry Pi personal computer
- Raspberry Pi server
- Raspberry Pi gateway
4. Specification
Basic Specifications
| No. | Specification | Parameter |
|---|---|---|
| 1 | Operating Voltage | 3.3V (provided by Raspberry Pi display interface) |
| 2 | Static Operating Current | Approximately 700mA |
| 4 | Display Interface | Raspberry Pi DSI |
| 5 | Operating Temperature | -20℃ to 70℃ |
| 6 | Mounting hole diameter | M2.5 |
| 7 | Raspberry Pi mounting hole dimensions | 58mm x 49mm |
| 8 | Display screen mounting hole dimensions | 113mm x 68mm |
| 9 | Weight | 120.7g |
Screen Specifications
| No. | Specification | Parameter |
|---|---|---|
| 1 | Display area size | 5.0 inches |
| 2 | Resolution | 800×480 |
| 3 | Pixel Pitch (mm) | 0.045(H)×0.135(V) |
| 4 | Color Display | 16.7M |
| 5 | Display Mode | Normally black, transmissive |
| 6 | Color Arrangement | RGB stripe |
| 7 | Data Interface | RGB 24-bit, digital (TTL) |
| 8 | Viewing Angle | Full view |
| 9 | Contrast Ratio | 1200 |
| 10 | Response Time | 30ms |
| 11 | Bonding Method | Full lamination |
| 12 | Brightness | 550cd/㎡ |
| 13 | Touch Points | 5-point capacitive |
| 14 | Refresh Rate | 60Hz |
| 15 | Surface Treatment | Fingerprint and glare resistant |
| 16 | Viewable Area (mm) | 108.0(W)×64.8(H) |
| 17 | Dimensions (mm) | 120.7(W)×75.8(H)×4.9(T) |
5. Interface Description
- Connect the screen's DISPLAY interface to the Raspberry Pi's DISPLAY interface using an FPC ribbon cable.
6. Tutorial
Step 1: Insert the SD card with the Raspberry Pi system downloaded into the Raspberry Pi.
Step 2: Connect the DISPLAY interface of the 5-inch touchscreen to the DISPLAY interface on the Raspberry Pi using the provided FPC ribbon cable.
Step 3: Ground the surface-mounted PCB nut.
Step 4: Power on the Raspberry Pi and wait for the screen to display.
7. PCB Dimensional Diagram
8. Download the documentation
9. Frequently Asked Questions
Q:
What should I do if the screen doesn't display properly after connecting it to the Raspberry Pi?
A:
Please check the power supply for the Raspberry Pi. When using the screen, it is recommended to use a 5V@2.5A adapter for the Raspberry Pi power supply.
For any questions, advice or cool ideas to share, please visit the DFRobot Forum.
Get *5”DSI Touchscreen with Optical Bonding for Raspberry Pi * from DFRobot Store or DFRobot Distributor.